Perth, Western Australia

Ducted Air Conditioning Perth

Whole-home reverse-cycle ducted air conditioning, designed and installed for Perth's climate. From single-storey Karrinyup bungalows to two-storey homes in the Hills, we size and zone each system so every room is comfortable — without inflating your power bill.

Zoned Comfort

Cool the living areas by day, bedrooms by night. Lower running costs, longer compressor life.

Premium Brands

Authorised installer for Daikin, Mitsubishi Electric, Fujitsu and ActronAir.

Heat-load Sized

Manual J-style calculation, never guesswork. Right capacity, right ductwork.

5-Year Workmanship

Backed by manufacturer warranty plus our own installation guarantee.

Why ducted is the right choice for most Perth homes

Perth's long, dry summers and mild, damp winters make reverse-cycle ducted air conditioning the most cost-effective whole-home solution available in WA. A single outdoor unit feeds insulated ducting through the roof space, delivering quiet, evenly distributed conditioned air to every room — and reversing in winter to provide gentle, dust-free heating.

Compared with multiple split systems, a ducted system gives a cleaner aesthetic (only discreet ceiling vents are visible), consistent temperatures across the whole footprint, and one centralised controller. With proper zoning, modern inverter-driven ducted systems can be more energy efficient than running three or four splits simultaneously — which matters when Perth temperatures climb past 40°C and the system runs for days at a time.

Sizing & zoning — the part most installers get wrong

An oversized system short-cycles, struggles to dehumidify, and burns out compressors years early. An undersized one runs flat out on hot February days and never reaches setpoint. We perform a proper heat-load calculation taking into account your roof colour, insulation R-value, window orientation (Perth's western sun is brutal on west-facing glass), ceiling height and air-change rate before recommending capacity.

Zoning is equally important. A typical 4-bedroom Perth home should have at least three zones — living, bedrooms, and a separate master — each with its own motorised damper. This lets you cool the lounge during the day at 22°C while keeping the bedroom zone closed off, then reverse it at bedtime. The energy savings over a single-zone system are typically 25–40%.

Installation process

We start with a free in-home assessment anywhere in the Perth metro area. You'll receive a written quote within 48 hours covering system capacity, brand options, duct layout, zone configuration, controller, and a fixed installation price — no surprises on the day.

Most installations take 1–2 days. Our team handles roof access, ductwork, electrical connection through a licensed sparky, refrigerant pipework, controller wiring, commissioning and a full handover walkthrough. We tidy up, test every zone, and don't leave until you're comfortable operating the system.

Service, maintenance & repairs

Ducted systems in Perth pull in fine red dust through filters all summer. We recommend an annual service — coil clean, filter replacement, refrigerant pressure check, drain flush, electrical inspection — to keep efficiency up and avoid expensive breakdowns mid-heatwave. We also repair all major brands, including systems we didn't install.

Perth Suburbs We Service

Perth CBDSubiacoCottesloeFremantleNedlandsClaremontMount LawleyInglewoodJoondalupWannerooScarboroughKarrinyupMorleyBayswaterVictoria ParkSouth PerthComoCanning ValeCanningtonRockinghamMandurahMidlandEllenbrookBaldivis

Not listed? We service all Perth metro — just call.

Frequently Asked Questions

How much does ducted air conditioning cost in Perth?

For a typical 4-bedroom Perth home, supplied and installed ducted reverse-cycle systems range from around $9,500 to $16,000 depending on capacity, brand, zoning and roof access. We provide a fixed written quote after an in-home assessment.

Daikin vs Mitsubishi vs Fujitsu — which brand is best?

All three are excellent. Daikin generally wins on quiet operation, Mitsubishi Electric on cold-climate heating efficiency, and Fujitsu on value. We're authorised to install all three and recommend based on your home, not commission.

How long does installation take?

Most Perth installations are completed in 1–2 days. Larger two-storey homes or retrofits with limited roof access may take 3 days.

Do you service Perth Hills and outer suburbs?

Yes — we cover the full Perth metro from Joondalup to Mandurah, including the Hills and Swan Valley.

Ready to get started?

Honest advice, fair pricing, work done right the first time.